Self-priming centrifugal pump with excellent suction capacity. Suitable for pumping water with low levels of sandy impurities, especially in domestic water supply installations and suitable for small farms and gardening, small scale industrial services, and where self-priming is necessary. Use to pump clean liquids free of solids and abrasives, non-viscous, nonaggressive, non-crystallised and chemically neutral, with properties similar to water. Install fixed in a horizontal position.
- Operating range: from 0.4 to 10.5 m3/h with head up to 62 metres.
- Liquid temperature range: from 0°C to +35°C for domestic use (EN 60335-2-41). For other use: from 0°C to +40°C
- Maximum ambient temperature: +40°C
- Maximum operating pressure: 8 bar (800 kPa)
- Motor protection rating: IP 44
- Terminal block protection rating: IP 55
- Insulation class: F
- Standard input voltage: 230/400 V - 50 Hz
About the pump
Pump body is cast iron, motor support is die cast aluminium, and the wear ring is stainless steel. The impeller, diffuser, venturi tube and sand guard are technopolymer. The mechanical seal is carbon/ceramic.
The three-phase pump is electric and set up with a pressure gauge, pressure switch, remote overload protection and three-way brass fitting for use when connecting to a tank.
About the motor
Asynchronous type, closed, with external air cooling. Rotor mounted on oversized greased-for-life ball bearings, to guarantee low noise and long life. Incorporated thermo-amperometric protection and permanently inserted capacitor in the single phase version. It is recommended to use overload protection for three phase motor protection, in compliance with current legislation. Manufactured pursuant to CEI 2-3 and CEI 61-69 (EN 60335-2-41).
Mapua Plumbing relies on the honest, experienced Allflow team
“Allflow is run by honest businessmen. They are specialists in their field and are good people to work with and they provide my team and me with good support. Any time I ring them, no matter who I deal with I get excellent customer service.”
Mapua Plumbing works as far south as Waikaia, as far west as Hokitika, and covers all of north Canterbury right up to Nelson and Tasman. No matter where their job is located, they prefer the products, service, and honest dealings they get with the team at Allflow.
“Some time ago now, Allflow recommended the DAB line of pumps to me. I tried them out and have never stopped using them. They are reasonably priced, which is important, but crucially, they never break down. I know it’s a solid brand made with high quality parts and materials that I can rely on and that my customers can rely on.
“It’s not smart business for me to have to revisit a customer because a pump I installed is failing too soon or has a fault. I never have this with the DAB pumps that Allflow sells me.”
The Allflow team is made up of specialists, Sean says. Clayton and Jacob have a depth of knowledge that he has come to rely on.
“Every time one of the team tells me something, it’s correct. If they don’t know the answer, they’ll find it. I’ve been to other places that sell pumps and you can tell that their staff don’t know anything about the pump. The team at Allflow is different, they know their equipment and they know their business and I get good information from them every time.”
Sean says working with Allflow gives him the confidence that he’s installing the correct equipment for each job. He says his customers are always happy with the results.
“I once worked on a very tricky job in North Canterbury for a customer who was a pilot living off the grid. He needed to pump water to his out-buildings. Rainwater collected in tanks on the roof of his hangar. He wanted to pump it to tanks situated about 500 metres away and up a hill. Then, the water had to be fed down to the house.”
Sean says he gave Allflow all the measurements and water requirements. They ran the calculations and identified a pump that would do the job.
“Not only did they do all the maths for me, they set up the pump so I could install it straight away, including with the right flow switches.
Sean says his business is mostly growing through word of mouth.
“I believe Mapua Plumbing has a solid reputation for doing solid work. We do it once, and we do it right. It’s really helpful to have a partner like Allflow supplying me the right advice and equipment that allows me to achieve this.”
Choosing a firefighting pump
When it comes to buying a firefighting pump, we recommend you consider the following options when choosing a pump for this very important task.
Also, keep in mind that you don't have to invest in this significant item just in case of fire. You can use the pump any time you need pressurised water, such as for water transfer, irrigation, equipment washdown, and spraying. You can also pump clean, non-aggressive liquids without solids or fibres in suspension.
We recommend you look at pumps that offer 100Psi or higher. For reference, a normal garden hose moves water at between 30 and 40 Psi. The Max head number multiplied by 1.42 gives you the Psi.
For most firefighting domestic use you'll want between 200 lpm and 1,000 lpm.
Max head refers to the maximum height the pump can pump to. You'll want to consider the difference in height between the pump and the location you are pumping water to. That means if you're pumping water up a hill or fighting a fire up a hill, the incline will matter. It's worth noting that moving the water considerable distances will compromise the pressure you get upon discharge from your pump. As a rule of thumb for firefighting, a Max head of 60m will give you what you need to cover most normal situations.
Most importantly, if you need to pump water to a significant height, or if you want any help with identifying the right option, we are here to help you, just ask!
The larger the pump outlet size, the faster the job will get done. Firefighting pumps have inlet/outlet sizes typically ranging from 1″ to 4″. That means a 3″ pump will finish a job three times faster than a 1″ pump.
Transfer pumps can move large volumes of water usually have lower Psi capacity and higher flow rates. High pressure pumps, including firefighting pumps, will have a higher Psi and move less water more quickly.
While not a requirement, it would be useful to have a self-priming pump to avoid the problem of air blockages that cause delays in the flow of water.
Most firefighting pumps are made from metal rather than plastic because they need to be robust. Make sure the componentry is metal too. Plastic elements may cause issues under higher demands.
We highly recommend the best quality engines, and you'll find these on our pumps. Petrol pumps are usually Honda pumps and the diesel pumps will be Yanmar. Mains-powered electric pumps are not recommended for firefighting unless you have a dependable generator or back up supply.
Diesel engines are more fuel efficient, will usually perform for longer and are considered a safer option than Petrol. However, petrol options are cheaper and there is often a greater range of petrol models to choose from. Get in touch with us if you're interested in a diesel pump.
Easy starting is an absolute must. Firefighting pumps come with a choice of starter options like recoil, electric starter, or both. When you opt for a quality brand using quality engines you generally can rely on the product starting up when you need it and for a long time.